Loading ...
Loading ...
Loading ...
13
Introduction
Wireless Remote Control
1 POWER button—Switches the power on/off.
When the Power indicator is not glowing, no controls
will work.
2 INPUT buttons—Select the input signal from
[HDMI1], [HDMI2], [DVI-D], [D-SUB],
[OPTION]*, [DISPLAYPORT], [YPbPr],
[S-VIDEO], and [VIDEO].
OPTION can be used when an expansion module is
mounted on the option slot.
3 PICTURE MODE button—Selects the picture
mode from [HIGHBRIGHT], [STANDARD],
[sRGB], and [CINEMA]. See page 39.
HIGHBRIGHT: The brightness is maximized.
STANDARD: Factory default setting.
sRGB: Suitable for color matching with
sRGBcompliant devices.
CINEMA: Suitable for viewing movies.
4 DISPLAY button—Displays the screen information.
See page 64. When the remote control mode is LOCK,
you can set it back to NORMAL by holding down the
DISPLAY button for at least 5 seconds (see page 61).
5 SET button—Accepts the settings made in the OSD
menu.
6 MINUS button (-)—Acts as (-) button to decrease the
When the PIP mode is active, this button moves the
sub picture to the left.
7 AUTO SETUP button—Displays the auto setup
menu. See pages 38 and 56.
8 AUDIO INPUT buttons—Selects the audio input
according to the video input.
This button works only while any of HDMI1,
HDMI2, OPTION (OPS-compliant computer), or
DISPLAYPORT video input is selected. See page 65.
9 PIP (Picture-In-Picture) buttons—
ON/OFF button: Switches the PIP or POP mode on/
off.
INPUT button: Selects video to be displayed in the
sub picture.
CHANGE button: Changes the main picture with the
sub picture.
[Description]
PIP: Picture-In-Picture
The sub picture is displayed within the main picture.
POP: Picture-Outside-Picture
The sub picture is displayed to the bottom right of the
main picture.
SBS: Side-By-Side
The main picture and the sub picture are displayed
side by side.
When the screen size is [CUSTOM] or [REAL], the
PIP and POP modes don’t work.
10 STILL button—
ON/OFF button: Switches the still picture mode on/
off.
CAPTURE button: Captures the new picture.
11 SIZE button—Selects the picture size from [FULL],
[NORMAL], [CUSTOM], [DYNAMIC], and
[REAL]. See page 63.
12 MENU button—Switches the OSD menu mode on/
off.
13 UP button (—Acts as () button to move the
OSD menu. When the PIP mode is active, this button
moves the sub picture up.
14 PLUS button (+)—Acts as (+) button to increase the
active, this button moves the sub picture to the right.
15 EXIT button—Displays the previous OSD menu.
16 DOWN button (—Acts as () button to move the
the OSD menu. When the PIP mode is active, this
button moves the sub picture down.
17 MUTE button—Switches the mute function on/off.
18 VOLUME buttons (VOL)—Pressing the plus (+)
side increases the audio output level. Pressing the
minus (-) side decreases the audio output level.
Wireless Remote Control
Loading ...
Loading ...
Loading ...