Loading ...
Loading ...
Loading ...
01
https://www.altonindustries.com
02
info@altonindustries.com
DESCRIPTION
INTRODUCTION
PURPOSE
INTENDED USE
IMPROPER USE
GENERAL POWER TOOL
SAFETY WARNINGS
OVERVIEW
TRAINING
PREPARATION
PREPARATION
This machine is used to remove and
clear away snow from pavements,
gardens, driveways and other ground
level surfaces.
This product has been designed and
built to remove and clear away snow
from pavements, gardens, driveways
and other ground-level surfaces.
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Any other usage not in keeping with
the above mentioned ones may be
hazardous and harm persons and/or
damage things. Examples of improper
use may include, but are not limited
to:
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains-operated (cord-
ed) power tool.
Your product has been engineered
and manufactured to high standards
for dependability, ease of operation,
and operator safety. When properly
cared for, it will give you years of
rugged, trouble-free performance.
1
1
2
3
4
5
6
8
9
10
11
12
13
7
2
3
4
5
6
7
8
9
10
11
13
12
Handle bar
Start lever
Upper handle
Middle handle
Chute control rod
Lower handle
Scraper
Impeller
LED light
Discharge chute
Chute deflector
Safety switch button
Cord retainer
WARNING
Use of the product on surfaces above
ground level, such as roofs on houses,
garages, porticoes or other structures or
buildings,
Activate the auger in the presence of
materials other than snow (e.g. soil,
grass, pebbles, etc.),
Pulling or pushing loads,
Do not carry passengers.
Do not allow children under the age
of 14 to operate this tool. Children
who are 14 years of age or older
must read and understand the
operating instructions and safety
rules in this manual and must be
trained and supervised by a parent.
Thoroughly inspect the area where
the appliance is to be used and
remove all doormats, sleds, boards,
wires, and other foreign objects.
Do not operate the appliance
without wearing adequate winter
garments. Wear footwear, which will
improve footing on slippery surfac-
es.
Adjust the housing height to clear
gravel or crushed rock surface.
Read the operating and service
instruction manual carefully. Be
thoroughly familiar with the
controls and the proper use of the
appliance. Know how to stop the
unit and disengage the controls
quickly.
Never allow children to operate the
appliance. Never allow adults to
operate the appliance without
proper instruction.
Keep the area of operation clear of
all persons, particularly small
children, and pets.
Exercise caution to avoid slipping or
falling, especially when operating in
reverse.
Do not use on graveled surfaces.
Dress Properly – Do not wear loose
clothing or jewelry. They can be
caught in moving parts.
Wear rubber boots when operating
the appliance.
Operation of the appliance in the
hand-held position is unsafe, except
in accordance with the special
instructions for such use provided in
the operator’s manual.
Never attempt to make any adjust-
ments while the appliance is
running (except where specifically
recommended by manufacturer).
Always wear safety glasses or eye
shields during operation or while
performing an adjustment or repair
to protect eyes from foreign objects
that may be thrown from the
appliance.
Prevent unintentional starting.
Carrying the appliance with your
finger on the switch or energizing
appliance that have the switch on
invites accidents.
Do not put hands or feet near or
under rotating parts. Keep clear of
the discharge opening at all times.
Exercise extreme caution when
operating on or crossing gravel
drives, walks, or roads. Stay alert for
hidden hazards or traffic.
After striking a foreign object, stop
the engine, remove the wire from
the spark-plug, thoroughly inspect
the power tool for any damage, and
repair the damage before restarting
and operating the power tool.
If the power tool should start to
vibrate abnormally, stop the engine
and check immediately for the
cause. Vibration is generally a
warning of trouble.
Stop the engine whenever you leave
the operating position, before
unclogging the collector/impeller
housing or discharge guide, and
when making any repairs, adjust-
ments, or inspections.
When cleaning, repairing, or
inspecting, make certain the collec-
tor/impeller and all moving parts
have stopped.
Loading ...
Loading ...
Loading ...