Loading ...
Loading ...
Loading ...
Using the Multi Deck Feature
Using the HyperDeck Extreme Control’s multi deck feature, you can select more that one deck
for simultaneous playback or recording. Select each deck individually to set your in or out
points. These don’t have to be the same, any timecode point will work. Alternatively, you can
just scrub to the point you want playback to start. Once all the timecode points have been set
individually on each deck, you can select them together. Press the ‘M’ key to the right of the
soft touch numbers for either the playback or record row and while holding it down, select the
other connected decks you which to operate concurrently. Each selected button will illuminate.
If the button flashes, it means there is either no deck connected or recognized attached to
that port.
NOTE When using the multi feature the timecode display will show the lowest number
deck selected. For example, if you have selected decks 2, 3 and 4 as playback decks,
the timecode display will show deck connected to deck number 2.
HyperDeck Extreme Control Front Panel
In this section of the manual you will find detailed descriptions of all the features on your
HyperDeck Extreme Control.
PLAYBACK
RECORD
TRIM PLAYER
REF
SERVO
REMOTE
RECORDER
HOURS MINUTES SECONDS FRAMES
IN
INPUT PREROLL SKIP REC SKIP
SHUTTLE JOG POSITION
EDIT EJECT REW PLAY F FWD STOP
OUT
ENTRY
DELETE
M
M
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
4
1
6
7
5
3
26
1 Playback and record buttons
16 numbered buttons let you select which deck is the player and which deck is the
recorder. Use the M button to select multiple playback and record decks.
2 Player and Recorder buttons
Player and recorder buttons let you select your player or recorder device. Once you
press the player button, the status indicators and timecode will update to reflect the
deck or device selected as player.
3 Timecode Display
The timecode display will update to the connected deck when the numbered playback
or record button or ‘player’ or ‘recorder’ button is selected. When a drive or tape is
ejected, the timecode display will revert to the deck default, generally 00:00:00:00.
64HyperDeck Extreme Control Front Panel
Loading ...
Loading ...
Loading ...