Loading ...
Loading ...
Loading ...
Timecode Input
There are four timecode input options available when recording.
Video Input Selecting video input will take the embedded timecode from SDI and HDMI
sources with embedded SMPTE RP 188 metadata. This will maintain sync
between your SDI or HDMI source and the file recorded on the HyperDeck
Extreme 8K HDR.
External XLR Click this option when using timecode via external XLR from analog
basedsources.
Last Clip Regen By selecting ‘last clip regen’ for your timecode input, each file will start one
frame after the last frame of the previous clip. For example, if your first clip
ends on 10:28:30:10, the next clip timecode will start at 10:28:30:11.
Preset Preset will use the set timecode under ‘timecode preset’.
Timecode Preference
For NTSC sources at frame rates of 29.97 or 59.94, you can select ‘drop frame’ or
‘non-drop frame’ recording. If the source is unknown, tap on default. This will maintain
the standard of the input, or default to drop frame if there is no valid timecode.
Timecode Preset
You can set your time code manually by tapping on the pencil icon and entering the
start time code via the touchscreen keypad.
Timecode Output
Tap on clip or timeline to select your timecode output
Select your timecode options for your SDI outputs.
Timeline Tap the timeline option to output your timeline timecode.
Clip The clip option will output the timecode of your clip.
Setup Page 3
36Settings
Loading ...
Loading ...
Loading ...