Loading ...
Loading ...
Loading ...
Audio
Audio Page 1
The audio input displays audio meters for embedded, XLR and RCA audio inputs. You can
select to display PPM or VU Meters. To change your meter type, see the ‘setup’ settings later in
this manual.
Video Click on the video tab for audio embedded in SDI and HDMI signals. If you
have selected 2 channels ofaudio on the record tab, only the top two
channels will be active.
XLR When recording audio from an XLR input, you can change the input level using
the slider beneath each channel.
RCA If you are using audio connected via RCA, only channels 1and 2 are active.
Audio Page 2
Swipe the audio tab left or right to reveal the XLR output audio meters screen to navigate to the
XLR output controls. You can adjust the levels for all four XLR outputs. Adjust the level by
dragging the slider beneath each channel to the left to reduce the output volume, or to the right
to increase the volume. The type of audio meter displayed depends on the meter selected in
the setup tab. XLR audio outputs can be used to connect audio to other devices such as the
ATEM Constellation 8K switcher.
Adjust the XLR Output channels using the slider beneath
33Settings
Loading ...
Loading ...
Loading ...