Loading ...
Loading ...
Loading ...
Installation Instructions
m
FINAL CHECK
Reviewthis Checklistbefore restoring power.
. Correct line voltage?
Singlecircuit only?
HVACRtype breaker/fuse7
Ductwork connected?
Caseand unit level7
Wall plenum caulked7Level7Flashing7
Drain connected?
Wall thermostat wired correctly?
Unit wired correctly7
Hydronic plumbing connections (ifapplicable)
Hydronic wiring connections (ifapplicable)
CONNECT POWER
1.If all the above items are correct,turn the power
on at the main servicepanel.
2. Turnthe unit power switch, on the front of the unit,
to ON by pressingthe top of the switch in.
SERVICING
WARNING:Risk ofElectricShock,
can cause injuryor death. Beforeservicing,
switch power off at the service panel and lock
the area to prevent power from being switched
on accidentally. When the area cannot be locked,
securely fasten
u prominent warning device, such as a tag,
to the service panel.
NOTE:We strongly recommend that any servicing
be performed bya qualified individual.
Forease of service,the unit can be removed
from the case:
1. Removethe front case panel.
2. Unplugthe power cord and disconnect the wall
thermostat connections.
3. Raisethe top duct byturning allfour case top duct
adjusting screws counterclockwise.
4. Removethe front and/or sidecase-to-unit grounding
screw, if present.
5. Slidethe unit out of the case.
22
Loading ...
Loading ...
Loading ...