Loading ...
Loading ...
Loading ...
Vacation Tips
Light Bulb Replacement
WARNING
Disconnect power to refrigerator before replacing
light bulb to avoid electrical shock which can cause
severe personal injury or death. After replacing light
bulb, restore power.
I CAUTION
Observe the following to avoid personal injury or
property damage.
Allow light bulbs to cool
Wear gloves when replacing light bulb.
Refrigerator Light
• Remove light bulb cover(B) by removing ¼" hex nut
screws(A). Replace with appliance bulb no greater than
60 watts.
• Replace light bulb cover by replacing ¼" hex nut screws.
A
B
Complete the following steps for short vacations.
1. Remove perishable foods.
2. If an ice maker is installed, move ice maker arm to
Offposition. (See "Automatic Ice Maker" section.)
Complete the following steps for long vacations.
1. Empty refrigerator and freezer sections.
2. Unplug refrigerator.
3. Clean refrigerator and door gaskets according to
General Cleaning instructions in "Care and
Cleaning" section.
4. Prop doors open, so air can circulate inside.
5. If an ice maker is installed, turn off water supply to
refrigerator and move ice maker arm to Offposition.
(See "Automatic Ice Maker" section.)
Energy Tips
• Operate in normal household temperatures of 55° to
110°F (13 ° to 43°C) away from heat sources and direct
sunlight.
• Set refrigerator, freezer, and temperature controlled
meat drawer system controls no colder than necessary.
• Keep freezer section full.
• Keep door gaskets clean and pliable. Replace gaskets
if worn.
• Keep condenser coil clean.
Freezer Light
• Remove light bulb cover(B) by removing ¼" hex nut
screws(A). Replace with appliance bulb no greater than
60 watts,
• Replace light bulb cover by replacing ¼" hex nut screws.
A
12
Loading ...
Loading ...
Loading ...