Loading ...
Loading ...
Loading ...
• When makinga cut usesteady, even pressure,
Never force cuts.
•Do notcut waq_edor wet lumber,
•Always holdyoursaw firmlywith bothhandsand keep
yourbody ina balanced positionsoas to resistthe
forces ofkickbackshoulditoccur,
When using your saw, always stay alelt and oxeroiso
control. Do not remove your saw from workplace
white the blade is moving,
DEPTH OF CUTADJUSTMENT
Always keep correctbladedepth setting. The correct
bladedepthsettingforall cutsshouldnotexceed 1/4 inch
belowthe materialto be cut. More bladedepthwill
increasethe chance ofkickbackand causethe cutto be
rough,One bladetooth below the matedalto be cutworks
bestfor mostefficient cuttingaction.
TO ADJUST BLADE DEPTH
•Remove battery packfrom saw.
WARNING: Failureto remove batterypackfrom
saw couldresultin accidentalstarting causing
possibleseriouspersonalinjury.
•Loosendepthadjustment knob.See Figure 13,
TORAISE
SAW
TO BASE
ASSEMBLY
TIGHTEN
DEPTH
JTO ADJUSTMENT
LOOSEN KNOB Fig, 13
•Hold base flat againstthe workpieceand raiseor lower
saw untilthe requireddepthis reached.
•"13ghtendepthadjustmentknobsecurely.
STARTING A CUT
Know the right way to useyour saw.
See Figure 14.
Never use your saw as shown in figure 15.
Fig, 14
WRONG Fig. 15
Never place your hand on the workplace behind your
sewwhile making a cut.
_k WARNING: To make sawing easierand safer,
alwaysmaintainpropercontrol ofyoursaw,Lossof
controlofyour saw could causean accidentresulting
in possibleseriousinjury.
15
Loading ...
Loading ...
Loading ...