Elica ESC628SS Use, Care, and Installation Guide

Loading ...

7 Reinstallthelters,graspthelterhandlesandplacetheback

edgeofthelterintothehood.

A.Fronthandle

B. Rear handle

8 Pushupandbackontherearhandleandplacethebackofthe

lterintothedrippantosecureit.Repeatforeachlter.

A.Fronthandle

B. Rear handle

Metal Filters and Drip Trays:

1 Use2handstoremovelters.

2 Grasplterhandles,pulltowardthefrontofrangehoodand

pulldownontherearhandletoremove.Repeatforeachlter.

A.Greasefilter

3 Remove grease drip tray.

A.Driptray

4 Washmetalltersandgreasetraysasneededindishwasher

or hot detergent solution to clean.

5 Replace grease drip tray.

6 Reinstalllters,grasplterhandlesandplacefrontedgeof

lterintothehood.

7 Pushuponthebackhandleandsetrearoflterintothedrip

traytosecure.Repeatforeachlter.

A.Greasefilter

Replacing a LED Lamp

TurnofftherangehoodandallowtheLEDlamptocool.

To avoid damage or decreasing the life of the new lamp, do

nottouchlampwithbarengers.Replacelamp,usingtissueor

wearing cotton gloves to handle lamp.

If new lamps do not operate, make sure the lamps are inserted

correctly before calling service.

1 Disconnect power.

2 Pushuponthelensandturnitcounterclockwise.

3 Removethelampandreplaceitwitha120-volt,7.5Wwatt

maximum halogen lamp with a GU10 base. Turn it clockwise to

lock it into place.

4 Repeat steps 2-3 for the other lamps if needed.

5 Reconnect power.

Loading ...

Elica ESC628SS Scanno 28" Stainless Steel Hood Insert