Loading ...
Loading ...
Loading ...
P a g e |
6
web: brohn.com.au
GENERAL SAFETY
The appliance should only be installed and connected by a licensed qualified
professional.
Care should be taken to ensure that the units and work surfaces that you build the
appliance into, meet with the relevant standards.
DURING USE
Care should be taken when utilising the appliance, otherwise there is a risk of burns
being caused.
You should not allow the electrical connection cables to come into contact with
the hob surface when it is hot or any hot cookware.
If fat and oil overheat, it can ignite extremely quickly. For this reason, when cooking
with fat and oil, the appliance should not be left unattended.
Make sure that all of the cooking zones are switched off after use.
CLEANING
Cleaning of the hob should be carried out on a regular basis.
IMPORTANT: Before attempting to clean the appliance, it should be
disconnected from the mains and cool down.
Great care should be taken whilst using this appliance and when following the
cleaning procedure.
You should not use a steam jet or any other high pressure cleaning equipment to
clean the appliance.
INSTALLATION
This appliance must be correctly installed by a qualified individual
and connected to the gas supply by a licensed professional strictly in
accordance with the manufacturer’s instructions, local standards and
regulations.
Manufacturer or a retailer of the appliance declines any
responsibility for injury or damage, to person or property, as a result
of improper use or installation of this appliance.
Loading ...
Loading ...
Loading ...