Loading ...
Loading ...
Loading ...
P a g e |
22
web: brohn.com.au
WARNING:
Regulator valve outlet pressure is set at the factory, please do not adjust in order to
avoid the occurrence of safety accidents.
Turn off the gas source for any work on gas appliances. If you find any fault of the
regulator valve operation, stop use and contact retailer or our Customer Service.
Do not remove regulator or maintain other work on gas parts of this appliance on
your own.
GAS SAFETY (INSTALLATION AND USE) REGULATIONS
IMPORTANT: The appliance MUST be connected to the gas supply by use of a
15 mm x ½” female coupler, seal, copper pipe and an isolation tap fitted in an
easily accessible position.
It is the law that all gas appliances are installed by a licensed gas fitter.
It is in your interest of safety to ensure installation compliance with the law.
Failure to install the hob correctly could invalidate the warranty, liability claims and
lead to prosecution.
INSTALLATION PROCESS
Put the gas seal inside of the 15 mm x
½” female coupler.
Fully tighten the 15 mm x ½” female
coupler and seal onto the gas rail.
IMPORTANT: The female coupler must
be positioned the right way up, as
shown in the above picture.
Loading ...
Loading ...
Loading ...