Loading ...
Loading ...
Loading ...
9
When the deep fryer is switched off at the
power outlet and then switched back on, the
cooking temperature display will default to the
celsius temperature scale.
Note
(b) Cooking Temperature Selection
If you wish to select a celsius temperature (other
than those predetermined in the Cooking Mode
Options), change the initial display temperature by
pressing the ‘Time-Temp’ button, then the ‘+’ button
to increase the temperature up to 190ºC or the ‘-‘
button down to 100ºC.
If you wish to select a Fahrenheit temperature (other
than those predetermined in the Cooking Mode
Options), change the initial display temperature by
pressing the ‘Cº-Fº’ button, then the ‘Time-Temp’
button, then the ‘+’ button to increase the
temperature up to 375ºF or the ‘-‘ button down
to 210ºF.
Step 6.
After selecting a cooking mode option or a cooking
temperature, press the (symbol) button in the centre
of the Control Selector. This starts the preheating and
the orange ‘heating’ light will illuminate on the
control panel. The word ‘Heating’ will flash and the
actual temperature of the oil will display on the LCD
screen and increase in 5º increments until the oil has
heated to the selected temperature (the blue
backlight will go out after 30 seconds). The orange
‘Heating’ light will go out and the word ‘Heating’ will
stop flashing. The word ‘Ready’ will flash on the LCD
screen and the deep fryer will sound 3 quick beeps
5 times.
Step 7.
Add food to the frying basket. Do not over fill the
basket, it should not exceed two-thirds full. (refer to
the MAX FILL LINE under handle).
Step 8.
Remove the lid and place the frying basket (with the
basket handle locked into the extended horizontal
position) into the holding position above the frying
bowl (slip the slot on the frying basket onto the
corresponding tongue in the frying bowl).
Step 9.
Holding the frying basket handle, lift from the
holding position and gently lower the basket into
the oil.
Step 10.
The default cooking time is 19 minutes. If a longer
or shorter cooking time is required, press the ‘Temp –
Time’ button on the right-hand side of the Control
Selector, then press the ‘+’ button to increase the
cooking time up to 60:58 (60 minutes 58 seconds)
or the ‘-‘ button to decrease the cooking time
down to 00:58 (58 seconds).
Step 11.
Press the button in the centre of the Control
Selector. This starts the cooking and the word
‘Cooking’ will flash and the cooking time will
display on the LCD screen. The time 19:00 will
count down in 1-minute increments; when 1 minute
remains on the screen the time will count down
in 1-second increments.
Step 12.
At the end of the cooking time, the time and the
word ‘Cooking’ on the LCD screen go out, the
temperature selected is displayed and the deep fryer
sounds 5 beeps.
BDF450_IB_FA.qxp:Blender 12/1/10 2:21 PM Page 9
Loading ...
Loading ...
Loading ...