Loading ...
Loading ...
Loading ...
11
Auto cut-out reset button
Always add the required amount of oil BEFORE
switching the power on at the power outlet. An Auto
Cut Out safety switch will be activated if the deep
fryer is turned on without oil in the bowl.
To re-set, allow the deep fryer to cool completely
then press the reset button located above the cord
storage area at the back of the control panel.
DURING AND IMMEDIATELY AFTER COOKING, STEAM MAY RISE THROUGH THE FILTER VENT
OPENINGS IN THE LID. THIS IS NORMAL, HOWEVER AVOID TOUCHING THIS AREA DURING
COOKING TO PREVENT STEAM BURNS AS THE STEAM GENERATED IS AT A HIGH TEMPERATURE.
AS THE BASKET GETS VERY HOT, ONLY USE THE HANDLE TO HOLD OR CARRY THE BASKET FOR
SERVING. ENSURE THE BASKET HANDLE IS LOCKED INTO POSITION.
SOLID OIL PRODUCTS, SUCH AS BUTTER, MARGARINE OR ANIMAL FATS OF ANY KIND SHOULD
NOT BE USED IN THE DEEP FRYER AS THEY MAY OVERHEAT AND CAUSE A FIRE HAZARD.
WATER AND OIL DO NOT MIX – NEVER ADD ANY WATER OR OTHER LIQUID TO HOT OIL. EVEN
SMALL AMOUNTS OF WATER WILL CAUSE THE OIL TO SPLATTER.
AVOID THE USE OF EXTENSION CORDS. SERIOUS HOT OIL BURNS MAY RESULT FROM A DEEP
FRYER BEING PULLED OFF A BENCH TOP. DO NOT ALLOW THE CORD TO HANG OFF THE EDGE
OF A BENCH TOP WHERE IT MAY BE GRABBED BY CHILDREN, OR BECOME ENTANGLED BY THE
USER. NEVER LEAVE THE DEEP FRYER UNATTENDED WHILE IN USE.
THE DEEP FRYER WILL GENERATE A LOT OF HEAT AND STEAM DURING AND AFTER THE
COOKING PROCESS. TO PREVENT THE RISK OF BURNS, DO NOT TOUCH OR BLOCK THE STEAM
VENTILATION AREA ON THE LID.
TAKE CARE WHEN OPENING THE LID. THIS PRODUCT GENERATES HEAT AND STEAM AT HIGH
TEMPERATURES, WHICH WILL ESCAPE IMMEDIATELY WHEN THE LID IS OPENED. AVOID
TOUCHING HOT SURFACES.
EXTREME CAUTION MUST BE USED WHEN THE DEEP FRYER IS FILLED WITH HOT OIL OR OTHER
LIQUID. DO NOT MOVE THE DEEP FRYER DURING COOKING AND ALLOW IT TO COOL BEFORE
REMOVING OIL.
BDF450_IB_FA.qxp:Blender 12/1/10 2:21 PM Page 11
Loading ...
Loading ...
Loading ...