Broan B33DHW Installation & Operation Instructions

Loading ...

800.558.1711 Installation & Operation Instructions

MAINTENANCE

Filter Maintenance

The B33DHW comes with a washable lter. Check lter every two months. Clean or replace the lter as neces-

sary.

Removing the Filter:

Remove the screws on the front cover and then push the front cover up gently to free the cover hooks from the

chassis. Filter is located on the back side of the front cover. Gently remove the lter by lifting the bottom side

corners rst to prevent bending it.

Filter Cleaning:

The lter can be vacuumed with a wet / dry vac or washed with warm water.

Reinstalling the Filter:

Insert the lter into the tabs on top of mount and ex the lter to insert it into the bottom tabs. Reinstall the cover

by lining up the tabs, sliding down into place, and secure with included tamper resistant or phillips screws.

WARNING!WARNING!

BE SURE THE UNIT IS POWERED OFF AND UNPLUGGED OR CIRCUIT BREAKER

IS TURNED OFF BEFORE REMOVING THE FRONT COVER TO SERVICE THE

UNIT; IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE

MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY QUALIFIED PERSONS

IN ORDER TO AVOID A HAZARD.

AVERTISSEMENT!AVERTISSEMENT!

ASSUREZ-VOUS QUE L’UNITÉ EST FERMÉE OU DÉBRANCHÉE OU QUE LE CIRCUIT

D’ALIMENTATION EST FERMÉ AVANT DE RETIRER LE PANNEAU AVANT POUR

ENTRETENIR L’UNITÉ.

AIR FLOW

Supply Air

Return Air

Supply AirSupply Air

Return Air

The B33DHW functions by drawing moist

air in through the bottom portion of the

diuser and returning dried air to the space

out the top portion of the diuser.

Note: Avoid blocking the return and

supply air ow to maximize unit

performance and prevent heat build

up. Furniture must be at least 6"

away from the diuser.

Diffuser Maintenance

It is recommended to use a mild detergent to clean the surface of the diuser, especially around the edges where

the return air is owing into the unit (see illustration below). This is where air is being drawn into the lter and may

collect dust. Do not use harsh solvents on the diuser.

The diuser can be painted to blend in with interior aesthetics. Use only paint that is recommended for

polycarbonate surfaces and follow the manufacturer’s recommendations for surface prep and application.

Loading ...

Broan B33DHW 33 Pint Dehumidifier