Loading ...
Loading ...
Loading ...
General Information • Using Connection Options
M
Back of IV
ie example presented here
nchMes the connection of a DVD
or other accessol 3' device to the
Component Video inputs (labeled Y,,
Ph, P19 on the back of the TX
('omponent Video provides you with
the best possible color and picmre
resolution.
NOTE: The Component Video inputs
signal is viewable only on the main
screen, not in the PIP window.
<_ Connect a signal a
cable TV to
two-way signal splitter.
<_ Connect two RF coaxial cables
to
the two-way signal splitter.
<_ Connect one of the RF coaxial
cables you just hooked up to the two-
way splitter to the PIP ANT(enna) "B"
input on the back of the TV.
@3_ Connect the other RF coaxial
cable to the IN(put) on the cable box.
Use another RF coaxial cable
to
connect the OUT(put) on the cable
box to the ANTENNA iN(put) on a
VCR.
@;_ Use another RF coaxial cable to
connect the ANTENNA OUT(put) on
the VCR to the ANT(enna) "A" input
on the back of the TV.
<Q_ Use a video cable to connect the
VIDEO OUT(put) on the VCR to the
AV2 IN(put) for VIDEO on the back
of the TV. Also use audio cables to
connect the AUDIO OUT(puts) L(eft)
and R(ight) fiom the VCR to the AV2
iN(puts) t\_r AUDIO on the back of
the TV.
<_Use video cables to
component
connect the Component Video outputs
(Y, Pb, Pr) on the back of the DVD to
the Component Video inputs on the
back of the TV.
@_ Use audio cables the
to connect
AUDIO OUT(puts) L(eft) and R(ight)
on the back of the DVD to the AV1
iN(puts) for AUDIO on the back of
the TV.
NOTE: The signal routed to the TV's PIP
ANT(enna) "B" input jack will allow %r
tbe selection and viewing of cable channels
at the TV (except for scrambled premi-
un_movie channels) Press the SOURCE
button on the relnote to select TUNER-B.
then press the PIP CH(mmel) DN/UP but-
tons to choose channels
'NN
VCR
I
(?able Box
(?able IV
Company
See page 43 for details on
how to select the signal
sources you have connected.
If you need accessories or parts to
complete the described connections,
contact your dealer, or our Parts
Information Center at
1-800-851-8885.
NOTES:
• The signal routed to the TV's
ANY(enna) "A" i_@ut will allow
plemmn_movie cbalmels to be
viewable on the YXq
• _/I nlllst select chmmels at tbe
cable box
• You must set your TV chalmel to
the salne output chalmel (usually
CH 3 or 4) as the cable box before
it is possible to use die cable box to
clmnge clmmMs on file TV
54
Loading ...
Loading ...
Loading ...