Loading ...
Loading ...
Loading ...
English64
Troubleshooting
Troubleshooting
Symptom Possible cause Action
The dishwasher is
too noisy.
The dishwasher makes a sound
when the dispenser cover is
open and the drain pump is
operating.
• This is normal.
The dishwasher is not level.
• Make sure the dishwasher
is level.
The nozzle bumps against the
dishes, creating a chopping
sound.
• Rearrange the dishes.
Yellow or brown lm
remains on dishes.
Coffee and tea soils.
• Use a cycle with a higher
temperature.
Indicators do not
light up.
The power cord is not
connected.
• Check power supply is
present.
The nozzles do not
rotate smoothly.
The nozzles are clogged with
food particles.
• Clean the nozzles.
A white coating
remains on dishes.
The water is too hard.
• Make sure the salt ll
indicator and softener
settings are correct
according to the water
hardness of your area.
• Make sure the salt storage
cap is correctly fastened.
Air bubbles and
scratch marks are on
the control panel.
Air gets into the protective
lm, causing EPS marks to
remain.
• Remove the protective lm
from the control panel.
The dishwasher
bubbles up and the
foam remains too
much on the front.
This may occur:
• If using generic kitchen
detergent.
• If loading a dish that
generic kitchen detergent
has been applied to.
• If inputting more than
required water.
• Turn the dishwasher off and
remove the bubbles.
• If the dishwasher bubbles
up severely, wait until the
foam subsides. Then, run
the Cancel & Drain cycle
followed by the prewash
process 2-3 times.
FULL_DW60BB890UAPET_DD68-00254C-00_EN.indd 64 2023-03-09 6:27:48
Loading ...
Loading ...
Loading ...