Loading ...
Loading ...
Loading ...
English22
Installation
Installation
STEP 2 Check the water line
• The water line pressure must be between 0.05 and 0.8 MPa.
• Make sure that the water temperature does not exceed 60 °C. Hot water over 60 °C may
cause the dishwasher to malfunction.
• Make sure that the water supply valve is turned off before connecting the water supply
line to the dishwasher.
STEP 3 Arrange the hoses
1. Clean the bottom of the countertop.
2. Attach the protective sticker as shown.
3. Pull the power plug, the water hose, and
the drain hose through the sink hole.
CAUTION
• Use caution not to kink or step on the
power plug or the hoses.
• Do not remove the brown paper on the
back of the dishwasher. The paper is
used to keep the rear side clean against
the wall.
FULL_DW60BB890UAPET_DD68-00254C-00_EN.indd 22 2023-03-09 6:27:34
Loading ...
Loading ...
Loading ...