Senix CSP4QL-L 4ql 26.5 Cc 4-cycle Gas Powered Pole Saw, 8-inch Oregon Bar And Chain

Operator’s manual - Page 5

For CSP4QL-L.

PDF File Manual, 60 pages, Read Online | Download pdf file

CSP4QL-L photo
Loading ...
Loading ...
Loading ...
5WWW.SENIXTOOLS.COM
SPECIFIC SAFETY RULES FOR POLE
PRUNERS
ADDITIONAL SAFETY WARNINGS FOR
OPERATION
1. Wear head and eye protection and personal
protective equipment (PPE), including correct
clothing.
2. Keep bystanders, especially children at a safe
distance during operation of the saw chain pole
pruner.
3. Keep all parts of the body away from the saw chain.
Do not remove cut material or hold material to be
cut when blades are moving. Make sure the switch
is off when clearing jammed material. The saw chain
continues to move after the switch is turned off. A
moment of inattention while operating the extended-
reach pruner may result in serious personal injury.
4. Carry the extended-reach pruner by the handle with
the saw chain stopped. When transporting or storing
the extended-reach pruner, always t the saw chain
Always disconnect the spark plug wire before
assembling, adjusting or cleaning, and before leaving
the machine unattended for any period.
Always use the harness to carry the tool weight on
the shoulder. If you use the harness across your body,
learn how to use the quick release on the harness and
keep it in front of your body.
• It is recommended that the unexperienced user
should have practical instruction in the use of the saw
and the protective equipment from an experienced
operator.
• This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a to ensure that
they do not play with the appliance.
• Children and juveniles, with the exception of
apprentices older than 16 years and under
supervision, may not operate the product. The same
applies for persons who do not or do not sufciently
know how to handle the product.
• The operating instructions should always be at hand.
Persons unt or tired must not operate the tool.
• Wait until the chain has come to a standstill
completely before placing it down.
Any servicing should be performed by an authorized
service representative.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
This unit produces an electromagnetic eld during
operation. This eld may, under some circumstances,
interfere with active or passive medical implants. To
reduce the risk of serious or fatal injury, we recommend
persons with medical implants to consult their physician
and the medical implant manufacturer before operating
this unit.
Inspect unit before each use.
Replace damaged parts. Check for fuel leaks. Make
sure all fasteners are in place and secure. Replace
parts that are cracked, chipped, or damaged in any way.
Make sure the cutting attachment is properly installed
and securely fastened.
Do not operate the unit inside a closed environment,
such as a room or building; breathing carbon monoxide
from exhaust fumes can kill.
Pour fuel outdoors where there are no sparks and
ames. Slowly remove the fuel cap only after stopping
the engine. Do not smoke while fueling or mixing fuel.
Wipe spilled fuel from the unit. Move at least 3 m (10 ft)
away from the fueling source and site before
starting engine.
Do not operate near electrical power lines. The unit has
not been designed to provide protection from electric
shock in the event of contact with overhead electric
lines. Consult local regulations for safe distances from
overhead electric power lines and ensure that the
operating position is safe and secure before operating
the saw chain pole pruner.
device cover. Proper handling of the extended-reach
pruner will reduce possible personal injury from the
saw chain.
5. Hold the extended-reach pruner by insulated gripping
surfaces only, because the saw chain may contact
hidden wiring. A saw chain contacting a ″live″wire
may make exposed metal parts of the extended-
reach pruner ″live″ and could give the operator an
electric shock.
6. Keep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by the saw chain.
7. Do not use the extended-reach pruner in bad
weather conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by
lightning.
8. To reduce the risk of electrocution, never use near
any electrical power lines.
9. Contact with or use near power lines may cause
serious injury or electric shock resulting in death.
10. Always use two hands when operating the
extended-reach pruner. Hold the extended-reach
pruner with both hands to avoid loss of control.
11. Always use head protection when operating the
extended-reach pruner overhead. Falling debris can
result in serious personal injury.
Loading ...
Loading ...
Loading ...