Loading ...
Loading ...
Loading ...
17WWW.SENIXTOOLS.COM
If further assistance is required, take the unit to a qualied service dealer.
TROUBLESHOOTING
PROBLEM SOLUTION
THE ENGINE WILL NOT START
The fuel tank is empty Fill the fuel tank with fresh fuel
The primer bulb was not pressed enough Press the primer bulb 10 times
The fuel is old (over 30 days) Drain the fuel tank and add fresh fuel
The spark plug is fouled Replace the spark plug
THE ENGINE WILL NOT IDLE
The air lter is dirty
Clean or replace the air lter
The fuel is old (over 30 days) Drain the fuel tank and add fresh fuel
Idle speed screw needs adjustment Turn idle speed screw clockwise to increase idle speed
THE ENGINE EMITS TOO MUCH SMOKE
Too much oil in crankcase
Drain engine oil and rell with correct amount of engine
lubricant
THE ENGINE WILL NOT ACCELERATE
The fuel is old (over 30 days) Drain the fuel tank and add fresh fuel
The cutting head is bound with grass Stop the engine and clean the cutting head
The air lter is dirty Clean or replace the air lter
THE ENGINE LACKS POWER OR STALLS
The fuel is old (over 30 days) Drain the fuel tank and add fresh fuel
The air lter is dirty Clean or replace the air lter
The spark plug is fouled Replace the spark plug
GUIDE BAR AND SAW CHAIN ARE RUNNING HOT, SMOKING OR STUCK
The saw chain tension is too tight Adjust the saw chain tension
The chain oil tank is empty Rell the chain oil tank
THE SAW CHAIN DOES NOT ROTATE
The saw chain tension is too tight Adjust the saw chain tension
The guide bar and saw chain are assembled
incorrectly
Refer to INSTALL THE CHAIN BAR AND CHAIN
The guide bar and saw chain are damaged
Inspect the guide bar and saw chain for damage.
Replace them if necessary
The drive assembly is damaged Take the unit to a qualied service dealer
THE SAW CHAIN ROTATES, BUT DOES NOT CUT
The saw chain is dull
Replace the saw chain or have it sharpened by an
authorized service dealer
The saw chain is on backwards Check and correct the saw chain direction
Loading ...
Loading ...
Loading ...