PowerSmart PS6300 Electric Airless Paint Sprayer, 3000PSI, 650W, High Efficiency Airless Sprayer

User Manual - Page 19

For PS6300.

PDF File Manual, 27 pages, Read Online | Download pdf file

PS6300 photo
Loading ...
Loading ...
Loading ...
MAINTENANCE
LONG TERM STORAGE
When cleaning for long term storage (more than 48 hours). It is very important that the Paint Sprayer is
not stored with any water or water-based material left in the Pump, Hose, Tubes, or Spray Gun. This will
corrode the product.
IMPORTANT: Clean the Sprayer before storage.
1. Remove paint hose if not already removed.
2. Turn the until over and loosen the Clamps from both Tubes, then disconnect Tubes from the Pump
Body.
3. Add one ounce of light household oil or a pump storage product into each inlet.
4. Turn Prime/Spray switch to Spray.
5. Turn Pressure Control Knob to Low/Spray.
6. Hold a rag over the paint hose outlet.
7. Switch Power to ON for five seconds, then turn the power off.
8. Turn Prime/Spray switch to Prime, this will keep storage fluids in sprayer.
9. Replace the Tubes and secure with the Clamps.
10. Wipe the sprayer with a clean cloth. Store in a clean dry location out of reach of children.
DAILY MAINTAIN
Equipment lifetime is rely on daily maintain. The following respects should be obeyed:
Read the Manual carefully before first using.
Check the electrical requirement before each working.
Thorough cleaning equipment and the accessories after using.
Coil the tube after cleaning, in case of any damage.
Add some lubricant if long time not use.
GENERAL REPAIR INFORMATION
WARNING: Do not touch the hot surface.
WARNING: To reduce risk of serious injury, including electric shock:
Do not touch moving or electric parts with fingers or tools while testing repair.
Unplug sprayer when power is not required for testing.
Install all covers, gaskets, screws and washers before you operate sprayer.
CAUTION: Do not run sprayer dry for more than 30 seconds. Doing so could damage
pump
packings.
Protect the internal drive parts of this sprayer from water. Openings in the cover allow for
air cooling of the mechanical parts and electronics inside. If water gets in these openings, the sprayer
could malfunction or be permanently damaged.
Prevent pump corrosion and damage from freezing. Never leave water or water-base paint in sprayer
when its not in use in cold weather. Freezing fluids can seriously damage sprayer. Store sprayer with
Pump Armor to protect sprayer during storage.
Loading ...
Loading ...
Loading ...