Loading ...
Loading ...
Loading ...
12. Stop spraying and activate trigger lock.
13. Remove the priming tube from the waste bucket and clip to suction tube and submerge in paint pail.
14. If the motor stops, the pump and tubes are primed. If it does not stop, repeat priming steps.
15. Start painting.
PAINTING
WARNING: Before painting, ensure the sprayer has been primed (see priming and startup
steps) and verify that nozzle tip is aligned properly.
Note: Remove or cover objects that you want to protect from overspray and paint mist.
1. Once primed, adjust nozzle to spray setting. Make sure the arrow on the
tip handle is pointing in the forward direction for spraying.
2. Start spraying at the lowest setting on the pressure control knob and
increase pressure as needed by turning clockwise to create a good spray
pattern.
PAINTING TECHNIQUES
Increase pressure until you achieve the correct full even spray pattern.
Note: Do a few spray tests on a sheet of cardboard to
make sure you achieve a good spray pattern. If you
reach the maximum PSI pressure setting and the spray
pattern is still not correct or there is an uneven spray
finish, a smaller tip size may be required.
Loading ...
Loading ...
Loading ...