Loading ...
Loading ...
Loading ...
NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are missing,
contact your local retailer.
This manual is designed to make it as easy as possible for you
to assemble, install, operate, and maintain your ceiling fan.
Unpacking Instructions
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all
.detpurretniebuoydluohsecalpruoygnidnifnilufpleheblliwdnadetelpmocneebevahspets
Wiring outlet box and box connectors must be of type
required by local code. The minimum wire would be a 3-
conductor (2-wire with ground) of the following size:
Tools Needed for Assembly (Not included) Materials
Wire Size A.W.G.Installed Wire Length
14
12
Up to 50 ft.
50 - 100 ft.
NOTE: If you are uncertain of part description, refer to exploded view illustration.
4
1. Check to see that you have received the following parts:
Hardware Bags
Safety Cable Kit
Motor Assembly (1)
Downrod/Hanger Ball Assembly (1)
– Downrod – Hairpin Clip
– Hanger Ball – Clevis pin
– Set Screw – Pin
Ceiling Canopy (1)
1/4 flat head screwdriver
WARNING
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 10). If you feel you
do not have enough wiring knowledge or experience,
have your fan installed by a licensed electrician.
Hanger Bracket
Assembly (1)
Motor Coupling
Cover Assembly (1)
Canopy Screw
Cover Assembly (1)
Hand-held Remote (1)
Wall Plate (1)
Screws (2)
Batteries (2)
Receiver (1)
Wire Connectors (9)
LED Assembly (1)
Light Kit Wire Cover (1)
Steel Cap (1)
Light Kit/Glass Assembly (1)
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts supplied
with this product and/or any accessories designated specifically for use with this product by Fanimation. Substitution
of parts or accessories not designated for use with this product by Fanimation could result in personal injury
or property damage.
#8-32 Junction Box
Screws, Stainless Steel
(2)
Flat Washers,
Stainless Steel
(2)
Flat Washer,
Stainless Steel
(1)
#10-24 Button
Head Screws (33)
Wire Connectors
(4)
Blade Plates (8) Safety Cable
(1)
Cable Clamp
(1)
Lag Bolt
(1)
Loading ...
Loading ...
Loading ...