Loading ...
Loading ...
Loading ...
13
How to Assemble Your Ceiling Fan Blades
Figure 1
HARDWARE USED:
x 32
x 8
#10-24
Button Head Screw
1. Carefully slide the blade through the slot as shown.
Make sure the notch of blade is fully seated into the
hex socket screw. Securely fasten the eight blades
to the motor housing using the blade plates and
button head screws. (Figure 1)
CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
Blade Plate
NOTE: You will find the fan blade set packed in its own
carton and hardware bag in the fan box.
Blade
#10-24
Button Head Screws
(4 each per blade)
Blade Plate
Hex Socket
Screw
Blade
1. Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Retain
the screw for later and slightly loosen the remaining
two screws. (Figure 1)
2. Assemble the light kit to the support bracket using
the two key slots in the light kit. Replace the previously
removed screw and securely tighten all three screws.
(Figure 2)
How to Assemble Your Light Kit or Cap
Motor Assembly
Figure 1
Light Kit
Figure 2
Loading ...
Loading ...
Loading ...