Loading ...
Loading ...
Loading ...
28
Maintenance of the Cooktop
If you find something goes wrong for your cooktop, before contact the
service or where you purchased it, please check whether below:
1. There is no power to the appliance:
- Check whether there is a power cut of your department;
- Check whether the appliance be connected to electricity properly;
- Has the timer setting elapsed;
- Whether it reaches the longest cooking time setting and auto shut off;
- Whether there is liquid boiling over touch control panel and overflow protection
devices auto shut off;
2. The touch control panel buttons can’t be active:
- Whether it’s under “Child Lock”, which there is “Lo” shows in timer displayer;
- Whether liquid/wet cloth over touch control panel active overflow protection;
3. After cooking there is “H” shows on display:
- This is normal. The cooktop is with Residual Heat Warning safety features. It will
remain on until the surface is cool enough for touch.
4. After turn off, the fan of induction cooktop remains working for a while:
-This is normal, this is to help appliances completely cool down.
5. Some pans make crackling or clicking noises during use of induction cooktop:
-This is normal, it’s the sound of induction coils during working, and for different
construction of your cookware, the clicking might be slightly different.
6. The glass is being scratched:
-Check whether you use unsuitable cookware, like rough-edged cookware.
-Check whether unsuitable, abrasive scourer or cleaning products being used.
7. The heating element of ceramic cooktop turns on and off alternately when
working:
-This is normal and natural feature for ceramic cooktop. Programmer of ceramic
cooktop, together with the thermostat or thermocouple in heating element, could
control the cooktop work at set power level and avoid overheat by heating
element work on/off alternately.
-If working at highest power level, heating element will continue turn on for a
certain time then on/off alternately.
-If working at other lower power level, heating element will on/off alternately at
certain frequency since beginning based on power setting of the cooking zone.
Loading ...