Loading ...
Loading ...
Loading ...
19
Using your Cooktop
To start cooking
1. After the cooktop be connected to electricity and power on.
Press and hold the ON/OFF control button for
about 3 seconds till you hear a “beep” to turn the
cooktop on. Now the cooktop enters into Standby mode, all heat
setting indicators and Timer setting indicators shows “-”
2. Place a suitable pan on the cooking zone you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. Set heating level of cooking zone
Before adjust heating level, need to touch the heating
zone selection control button to select and active the
cooking zone you wish to use.
The heat setting indicator of the selected zone flashing when
be active, then you could adjust its heat level by below:
• Set heat setting by touching the or button.
• If press and hold either of the two buttons, the value will
adjust down or up rapidly, from 0 to 9 in circle.
Notes:
1. After connect to electricity, when power on, the buzzer of cooktop beeps once,
all indicators light up for 1 second then go out.
2. When the cooktop in Standby mode, if there is no practice within 1 minute,
the electric cooktop will auto turn off, with buzzer beeps once.
3. To turn on cooktop, press the ON/OFF control button and hold on for about 3
seconds; To turn it off, just need to press ON/OFF button again.
4. The power level can be adjusted from 0 to 9, default setting is level 5.
5. The heat setting indicator of the selected zone flashing when adjusting.
After adjusting, the number flashing for 5 seconds then stop flashing,
then the setting is be confirmed.
To turn off cooktop
1. You can turn the cooking zone off by adjust heat setting to
level 0, which indicator shows“-“.
2. You can also turn the whole cooktop off by touching the
ON/OFF control button.
Loading ...
Loading ...
Loading ...