Loading ...
Loading ...
Loading ...
13
Selection of installation equipment
-Cut out the work surface according to the sizes shown in the drawing.
-For the purpose of installation and use, a minimum of 5 cm space shall
be preserved around the hole.
-Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused
by the heat radiation from the hotplate. As shown below (measure by
unit: inch):
Model
L
W
H
D
A
B
X
EMPV-30REC12
30.3
20.5
2.0
1.9
29.3+0.2
-0
19.5+0.2
-0
2.0 min
Under any circumstances, make sure the electric cooktop is well ventilated and
the air inlet and outlet are not blocked. Ensure the electric cooktop is in good work
state. As shown below:
Note: The safety distance between the hotplate and the cupboard above
the hotplate should be at least 29.9inches.
Loading ...
Loading ...
Loading ...