Loading ...
Loading ...
Loading ...
ZENMUSE L2
User Manual
20
©
2023 DJI All Rights Reserved.
Manual Flight
1. Fly the aircraft to an appropriate height and tap Calibrate to start a calibration flight. To
ensure ight safety, enable obstacle sensing and make sure the area shaded red on the map
is clear of obstacles.
2. Fly the aircraft to the target and adjust the gimbal to an appropriate angle. Tap to start
point cloud recording after setting the camera parameters.
• It is recommended that the target be 5 to 150 meters away from the payload. Note
that the accuracy may decrease when the distance between the target and the
payload is less than 30 m.
3. Press the L1/L2 button on the remote controller to switch the display, and press the R2
button to preview the model recorded in real time during ight.
4. Tap again to nish recording. It is recommended to perform IMU Calibration again after
recording.
5. After the ight task, the user can preview the 3D models or even merge models collected
from multiple ight tasks.
6. Power o the aircraft after completing the task and remove the microSD card from the L2.
Insert the microSD card into a computer and check the point cloud data and other les in
the DCIM folder.
Task Quality Report
When finished an Area Route or a Waypoint Route task, a task quality report is generated
automatically to display the detailed information of the task and ight route status. Users can
mark the route segments with low quality in the report.
1. View the quality report using either of the following methods:
Press the C2 button on the remote
controller and follow the prompts
In the flight route library, select the desired route
and tap View Task Quality Report.
Loading ...
Loading ...
Loading ...