Loading ...
Loading ...
Loading ...
7
A. Water level switch installing plate
B. Water supplying pipe
C. Water charging tank: Approximate 3.5 litters volume
D. Water outlet control valve of water charging tank
E. Water tank for water circulation: Approximate 0.9 litters volume
F. Ice full detecting board: Use to detect the inner cabinet is full of ice or not, and to check the
ice-harvest process is over or not.
G. Water circulation pump
H. Water drain pipe of the water tank：When ice-making, this silicone pipe should be clamped in the
slot of the water tank wall; And when draining the water, this pipe should be pulled out and expand
completely.
I. Ice full detector
J. Water level detecting switch
K. Evaporator (ice-making module)
L. Water dividing pipe：With eight little holes, water will flow out from these little holes. And if no
water flows out, can be disassembled and cleaned.
3) Operation panel
A．LCD display window
1、Unit ON or OFF state symbol: When the unit is turned off(standby mode), this symbol
flashes, and when the unit is working, the symbol will keep lighting on.
2、Ambient temperature and ice-making countdown time display
3、Ice-making setting and Timer setting display
4、Error code：E1 means that the ambient temperature sensor is faulted
E2 means that ice-making process is abnormal；
5、Light symbol：When this symbol displays, the LED light inside the cabinet will be on；
6、Water flowing and water absence symbol: If the arrow of this symbol flashes, means the
water is flowing in to the water tank; And if the whole symbol keeps on, means there is no
enough water to start the ice-making process.
7、Ice-full display: When the ice storage cabinet is full of the ice cube, this symbol will
display, and the unit will stop ice-making process.
8、Ice making and harvest display：When the ice cube symbol keep rotation, means the unit
is making the ice; And if the symbol flashes, means the unit is during the ice harvest process.
9、Self-cleaning display.
B．“LED light” button: To turn on or turn off the internal LED light;
Note: Keep pressing this button for more than 5 seconds, it is to change the ambient
temperature unit between Fahrenheit degree and Centigrade degree.
C．“Timer/Clean”button：Quickly press this button once, to enter the Timer setting program; And
1234
5
67
8
9
LIGHT TIMER
CLEAN ON/OFF
Loading ...
Loading ...
Loading ...