Loading ...
Loading ...
Loading ...
18
Internal LED light operation
When the unit is plugged on, press the “LIGHT” button on the operation panel once to lighten the
LED light inside the ice bin and the “ ” symbol on the LCD display window will also be on.
Press this button once again, the LED light and the “ ” symbol will be off at same time.
NOTE: If you press the “LIGHT” button for more than 5 seconds, the ambient can be changed
between Centigrade degree and Fahrenheit degree（between ℃ and ℉）。
ERROR code of unit breakdown
When the unit is breakdown, the error code will display in the left side of LCD display window.
E1 means the sensor of ambient temperature is malfunction。
E2 means that ice making program is abnormal, including too big ice-cube,no ice-cube falling
down, or not making ice cube, etc.
NOTE: During the ice cube making process, press “ON/OFF” button for more than 5 seconds, the
unit will jump into the ice-harvest process . After the ice harvest process is completed, the uni will
recover to ice making process.
Water Drainage
Make sure the water drainage pipe has correctly connected at the unit back first.
A. You can drain the the water in ice storage bin through the white drainage pipe connected on the
back drainage port. Make sure not to set the white drainage pipe too high.
B. For the water in the water tank,you can pull out the silicone pipe on the right side of the water tank
indicating “H” in above illustration to drain out the cleaned water in the water tank, till the silicone pipe
extend completely, the water can flow out to ice bin. Then the water can be drained out through the
the water drain port at unit back.
Reminding: Clean the water tank frequently, it can improve the ice-cube quality and the unit and
its water circulation pump can work much longer.
C. For the water in water charging tank, pull out the silicone pipe on the right side of the water tank
indicating “H” in above illustration, then plug on the unit, let the unit run at ice-making program or
self-cleaning program, the water will flow into the water tank, again through the silicone pipe flow into
the ice bin, at last can be drained out the unit through the water drain port at unit back.
Normal Sounds
Your new ice maker may make sounds that are not familiar to you. Most of the new sounds are normal.
Hard surfaces like the floor, walls and cabinets can make the sounds seem louder than they actually
are. The following describes the kinds of sounds that might be new to you and what may be making
them.
You will hear a swooshing sound when the control valve opens to let water flow into the water tank
Loading ...
Loading ...
Loading ...