Loading ...
Loading ...
Loading ...
Connect to a wireless network with a router
TIP: To print the Wireless Quick Start Guide, press and hold the Information button ( ) for 3 seconds.
●
Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
●
Connect your printer to a wireless network using HP printer software
Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before you can connect your printer to a wireless network using WPS, make sure you have the following:
● A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point.
NOTE: The printer supports connections using 2.4 GHz or 5 GHz.
● A computer connected to the wireless network that you intend to connect the printer to. Be sure you
have installed the HP printer software on the computer.
If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your
router has a push button, follow the PIN method.
To use the Push Button Conguration (PBC) method
1. Press and hold the Wireless button ( ) for at least three seconds to start WPS Push Button method.
2. Press the WPS button on your router.
NOTE: The product begins a timer for approximately two minutes while a wireless connection is established.
If the printer connects successfully, the light next to the Wireless button glows steady blue.
To use the PIN method
1. Press and hold the Wireless button ( ) and the Information button ( ) for at least 5 seconds to
start WPS PIN method and print a page with a PIN code.
2. Open the conguration utility or software for the wireless router or wireless access point, and then enter
the WPS PIN.
NOTE: For more information about using the conguration utility, see the documentation provided
with the router or wireless access point.
Wait for about two minutes. If the printer connects successfully, the light next to the Wireless button glows
steady blue.
22 Chapter 3 Connect your printer ENWW
Loading ...
Loading ...
Loading ...