Loading ...
Loading ...
Loading ...
21
Adjusting the extendable extension table(Fig. 9 & Fig. 10)
The extension table allows the user to increase the length of the table for greater
ripping capacity. To use the extension table;
1.Unlock or remove the rip fence from the table.
2.Unlock the extension table(A) by loosen the extension lock lever (B), slide the
extension to the desired width. Use the scale on the front rail when a specic width
is desired.
3. Once the extension is in the desired position,tighten the lock lever(B) to secure
the extension in place. The rip fence can now be installed as shown in.
4.Lock lever(B) is under the table.
Adjusting the blade height (Fig. 11)
The blade height should be set higher (above) the top of the work-piece to cut.
Turn the round handle(A) to set the blade to the required depth.
- Anticlockwise: smaller cutting depth
- Clockwise: larger cutting depth.
Fig. 9
Fig. 10
Fig. 11
Loading ...
Loading ...
Loading ...