Loading ...
Loading ...
Loading ...
09
4) Table saw operating procedure warnings
a) Turn o the table saw and disconnect the power cord when removing the table
inse, changing the saw blade or making adjustments to the riving knife, antikick-
back device or saw blade guard, and when the machine is left unattended.
Precautiona measures will avoid accidents.
b) Never leave the table saw running unattended. Turn it o and don’t leave the tool
until it comes to a complete stop. An unattended running saw is an uncontrolled
hazard.
c) Locate the table saw in a well-lit and level area where you can maintain good
footing and balance. It should be installed in an area that provides enough room to
easily handle the size of your workpiece. Cramped, dark areas, and uneven slippe
oors invite accidents.
d) Frequently clean and remove sawdust from under the saw table and/or the dust
collection device. Accumulated sawdust is combustible and may self-ignite.
e) The table saw must be secured. A table saw that is not properly secured may
move or tip over.
f) Remove tools, wood scraps, etc. from the table before the table saw is turned on.
Distractions or potential jams can be dangerous.
g) Always use saw blades with correct size and shape (diamond versus round) of
arbor holes. Saw blades that do not match the mounting hardware of the saw will
run o-centre, causing a loss of control.
h) Never use damaged or incorrect saw blade mounting means such as anges, saw
blade washers, bolts or nuts. These mounting means were specially designed for
your saw, for safe operation and optimum peormance.
i) Never stand on the table saw, do not use it as a stepping stool. Serious inju
could occur if the tool is tipped or if the cutting tool is accidentally
contacted.
j) Make sure that the saw blade is installed to rotate in the proper direction. Do not
use grinding wheels, wire brushes, or abrasive wheels on a table saw. Improper saw
blade installation or use of accessories not recommended may cause serious inju
Loading ...
Loading ...
Loading ...