Loading ...
Loading ...
Loading ...
70
MAC Installation
Page right again to reach the
IP address screen and use the
encoders to set the IP address to:
192 . 168 . 100 . X
(ensuring that ‘X’ is different to
that of the computer).
On the following pages, set the
Subnet Mask to:
255 . 255 . 255 . 0
Then set the Port to:
1212
Press the Setup Button again
to exit setup and save these
settings.
SETTING AUTOMATIC IP ADDRESS (USING DHCP)
If you have connected DLC to a network using DHCP to automatically assign IP addresses,
then you will need to set DLC to use DHCP.
On the second page of the Setup Menu, ensure that the Use DHCP option is set to
YES,
then press the Setup Button again to exit setup and save these settings. Make sure your
Mac is congured to use DHCP in the Network System Preferences (by default your Mac
should be set to use DHCP).
Connected
Disconnected
DLC CONNECT
Once network settings have been nalised,
reboot the console and the computer. On
rebooting, DLC Connect should open and
the console should be listed. Highlight
the console within the app, and click the
connect button.
Your DLC module should now be connected
to your Mac and ready for conguration
as a HUI control surface and analogue
automation platform.
The DLC connect app icon in the menu bar
will display the connectivity status, with
a black icon indicating DLC is connected,
and a greyed out icon indicating DLC is
disconnected.
Loading ...
Loading ...
Loading ...