Loading ...
Loading ...
Loading ...
SUB GROUP METERS
The Sub Group Meters show you the post fader
signal level of the Sub Groups including an
OVER indicator to alert you should you reach
the headroom limit of the Sub Groups.
TALKBACK MIC CONNECTOR
Use this to connect any standard microphone for
talkback use. The connector has +48V Phantom
Power for use with condenser mics. Phantom
Power can be switched off by removing the
jumper at LK1 on the Master Meter circuit
board.
MAIN METERS
The Main Meters show you the level of the mix
outputs after the Master Fader. This includes
an OVER indicator to alert you if you reach the
headroom limit of the Mix Outputs.
POWER RAIL INDICATORS
Shows the current status of the power rails of
the console. If they are all lit up then all is well.
If any of the power rail lights aren’t on but the
PSU is, then it indicates that there is an issue
and we would recommend contacting us at:
HEADPHONE OUTPUT
The ASP8024-HE includes a reference grade
Headphone Amplifier which is accessed by
routing the audio to the ALT 3 outputs in the
Monitor Control Section of the console. The
headphone jack is a standard 6.35mm TRS jack.
GAIN REDUCTION METER
The Gain Reduction Meter shows you the
amount of compression that is being applied.
1
2
3
4
5
6
1 2 3 4
5 6
25
master meters
Loading ...
Loading ...
Loading ...