Loading ...
Loading ...
Loading ...
BUS ROUTING SWITCHES
Assign channel signal to any of the 24 Multi-track Buses
(or 48 Buses if the 48 Channel Bus Mod is installed).
SHIFT
Offset the value of each routing switch by 12 so that
signals can access Multi-track buses 13-24.
FOLLOW PAN
Use to create a stereo bus. Bus routing will follow the
channel pan position, with odd buses providing the
left channel, and even buses providing the right.
LF
Allows you to route audio from the Long Fader path
of the channel to the multi-track buses. By default SF
(Short Fader) signals feeds the routing matrix.
SEND LEVEL (dB)
Controls the amount of signal being sent to the
corresponding Aux/Cue Bus. This can be anywhere
from -inf to 0dB. Use these to build FX sends to
reverbs etc.
SF
By default the sends are taken from the LF (Long
Fader). SF allows you to send audio from the short
fader path to the Aux Buses. This can be pre or post.
PRE
Takes the signal from before the fader (SF or
LF) rather than after, to ensure that the fader
position doesn’t affect the aux send level. Great for
headphone mixes.
7-8, 9-10, 11-12
Use these buttons to shift the send destinations to
Auxes 7-12.
1
2
3
4
5
6
7
8
The routing of the ASP8024-HE allows you to send the
signal of any given channel to any of the 24 Multi-track
Buses, giving you a huge amount of exibility at both
the tracking and mixing stage. Up to 12 Auxes and 2
Cue Sends allow you to easily utilise outboard effects
and control over artist foldback.
1
2
3
4
6
8
7
5
11
BUS Routing & Auxes
Loading ...
Loading ...
Loading ...