Senix CSE15-M Operator’s manual

Loading ...

4 WWW.SENIXTOOLS.COM

ON/OFF SWITCH.

• Use the right tool. Only use this tool for

its intended purpose.

• Always hold the unit with both hands when

RSHUDWLQJ.HHSD¿UPJULSRQERWKKDQGOHV

or grips.

• DO NOT overreach. Always keep proper

footing and balance. Take extra care when

working on stairs, steep slopes or inclines.

To avoid serious injury, DO NOT operate

the unit while on a ladder or a roof.

• Keep hands, face, and feet away from all

moving parts. DO NOT touch or try to stop

moving parts.

• DO NOTWRXFKWKHHQJLQHRUPXIÀHU7KHVH

parts get extremely hot from operation,

even after the unit is turned off.

• DO NOT operate the unit faster than the

speed needed to do the job. DO NOT run

the unit at high speed when not in use.

• DO NOT force the unit. It will do a better,

safer job when used at the intended rate.

• $OZD\VႋRSWKHXQLWZKHQRSHUDWLRQ

is delayed or when walking from one

location to another.

• Before setting the unit down, always MAKE

SURE the engine is off and all moving parts

have stopped.

• If you strike or become entangled with a

foreign object, stop the unit immediately

and check for damage. DO NOT operate

the unit before repairing damage. DO NOT

operate the unit with loose or damaged

parts.

• Unplug the unit for maintenance or

repair.

• Use only original equipment

manufacturer (OEM) replacement parts

and accessories for this unit. Use of any

other parts or accessories could lead to

serious injury to the user, or damage to the

unit, and void the warranty.

• Keep the unit clean. Carefully remove

vegetation and other debris that could

block moving parts.

• 7RUHGXFH¿UHKD]DUGNHHSDLUYHQWV

free from grass, leaves or excessive

grease.

• ,IWKHXQLWႋDUWVWRYLEUDWHDEQRUPDOO\

ႋRSWKHXQLWLPPHGLDWHO\ Inspect the unit

for the cause of the vibration. Vibration is

generally an indicator of trouble.

'RQRWSHUPLW¿QJHUVWRXFKWKHWHUPLQDOV

RISOXJZKHQLQႋDOOLQJRUUHPRYLQJWKH

extension cord from the plug.

ELECTRICAL SAFETY

WARNING!

1. Double insulated tools are equipped

with a polarized plug (one blade is

wider than the other and will require

the use of a polarized extension

cord.7KH&KDLQ6DZ¶VSOXJZLOO¿WLQWR

a polarized extension cord only one

ZD\,IWKHSOXJGRHVQRW¿WIXOO\LQWRWKH

extension cord, reverse the plug. If the

SOXJVWLOOGRHVQRW¿WREWDLQDFRUUHFW

polarized extension cord. A polarized

extension cord will require the use of a

SRODUL]HGZDOORXWOHW7KLVSOXJZLOO¿WLQWR

the polarized wall outlet only one way.

,IWKHSOXJGRHVQRW¿WIXOO\LQWRWKHZDOO

outlet, reverse the plug. If the plug still

GRHVQRW¿WFRQWDFWDTXDOL¿HGOHFWULFLDQ

to install the proper outlet. Do not

change or alter the equipment plug,

extension cord receptacle, or extension

cord plug in any way.

2. Double insulation eliminates the need

for the three-wire grounded power cord

and grounded power supply system.

Applicable only to Class II (double-

insulated) tools. This Chain Saw is a

double insulated tool.

Circuit Interrupter) protection should be

provided on all circuits or outlets to be

used for electric chain saws and lawn

and garden power tools. Receptacles are

available having built-in GFCI protection

and should be used for this measure of

protection.

WARNING!

• Double insulation DOES NOT take the

place of normal safety precautions when

operating this tool.

 *XDUGDJDLQႋHOHFWULFVKRFN3UHYHQW

body contact with grounded surfaces.

For example: metal pipes, wire fences.

3. BEFORE plugging in the tool, BE SURE

that the outlet voltage supplied is within

the voltage marked on the tool’s data

plate. DO NOT use ‘AC only” rated tools

with a DC power supply.

Loading ...

Senix CSE15-M 18-inch 15 Amp Corded Electric Chainsaw

Operator’s manual - Page 4