Loading ...
Loading ...
Loading ...
ENGLISH
6
The label on your tool may include the following symbols. The
symbols and their definitions are asfollows:
BPM .................... beats per minute
V ......................... volts
min ..................... minutes
j
or DC ............direct current
…/min ..............per minute
RPM .................... revolutions per
minute
A ......................... amperes
SAVE THESE INSTRUCTIONS
Additional Safety Information
WARNING: Never modify the power tool or any part of
it. Damage or personal injury couldresult.
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or dust
mask if operation is dusty. ALWAYS WEAR CERTIFIED
SAFETYEQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratoryprotection.
WARNING: Some dust contains chemicals known
to State of California to cause cancer, birth defects
or other reproductive harm. Some examples of these
chemicals are:
• compounds in fertilizers,
• compounds in insecticides, herbicides
andpesticides,
• arsenic and chromium from chemically
treatedlumber.
To reduce your exposure to these chemicals, wear
approved safety equipment such as dust masks that
are specially designed to filter out microscopicparticles.
WARNING: Use of this tool can generate and/or
disperse dust, which may cause serious and permanent
respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for
the dust exposure. Direct particles away from face
andbody.
WARNING: Always wear proper personal hearing
protection that conforms to ANSI S12.6 (S3.19)
during use. Under some conditions and duration
of use, noise from this product may contribute to
hearingloss.
CAUTION: When not in use, place tool on its
side on a stable surface where it will not cause a
tripping or falling hazard. Some tools with a large
battery pack will stand upright but may be easily
knockedover.
• Air vents often cover moving parts and should be
avoided. Loose clothes, jewelry or long hair can be caught
in movingparts.
• When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed ordirection.
• When not in use, the battery should be removed. The
appliance should be stored in a dry , well ventilated place
out of reach ofchildren.
• Children should not have access to storedappliances.
• Do not work on steep slopes. Work across the face of slopes,
not up anddown.
• Never cross gravel paths or roads while the appliance
isrunning.
• Never touch the cutting blade while the appliance
isrunning.
• A coasting blade can cause injury while it continues to spin
after the trigger is released. Maintain control until the blade
has completely stoppedmoving.
• Do not put the appliance down until the cutting blade has
come to a completestandstill.
• Be aware of blade thrust. The appliance could suddenly
move sideways, forward or backwards when the cutting
accessory jams or cataches on an object such as a sapling
or treestump.
• The thrust may be strong enough to suddenly move the
unit in any direction. Blade thrust can occur without
warning if the blade snags, stalls orbinds.
• Keep hands and feet away from the cutting blade at all
times, especially when switching on themotor.
• Before using the appliance and after any impact, check for
signs of wear or damage and repair asnecessary.
• Close supervision is necessary when the appliance is used
nearchildren.
• This appliance is not to be used as atoy.
• Use in a dry location only. Do not allow the appliance to
becomewet.
• Do not immerse the appliance inwater.
• Do not open the body casing. There are not user‑serviceable
parts inside
• Do not operate the appliance in explosive atmospheres,
such as in the presence of flammable liquids, gases ordust.
• Do not use toothed blades, such as saw blades, with
thisproduct.
• Stop using IMMEDIATELY if you feel excessive vibration.
Inspect the product thoroughly for loose hardware or
damage before continuing, specifically the blade. Replace
affectedparts.
Safety of Others
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for theirsafety.
• Do not use this product near bystanders. The metal blade
could throw or richochet small objects that it may come
in contact with, such as small rocks, causing serious injury
tobystandars.
• KEEP ALL BYSTANDERS AWAY – at a safe distance from
work area, especially children. MAKE SURE that other
persons and pets are at least 100' (30 m)away.
• Children must be supervised to ensure that they do not play
with theappliance.
Loading ...
Loading ...
Loading ...