Crossover GAS DRYER STAND ALONE Installation Manual

Loading ...

Preventive Maintenance

6:1

Cleaning

A program and/or schedule should be established for periodic inspection, cleaning, and removal

of lint from various areas of the dryer, as well as throughout the ductwork system. The frequency

of cleaning can best be determined from experience at each location. Maximum operating

efciency is dependent upon proper airow. The accumulation of lint can restrict this airow. If

the guidelines in this section are met, the dryer will provide many years of efcient, trouble free,

and most importantly, safe operation.

Daily

• Clean the lint screen after each load.

Weekly

• Clean lint accumulation from lint chamber, and temperature sensor area.

• See illustration below.

• Clean the door gasket.

• Use a soft wash cloth and mild detergent to clean door.

Every Third Month

• Disconnect Power.

• Remove lint from gas valve burner area with a dusting brush or vacuum cleaner attachment.

• Vacuum make up air inlet holes. On removing the lint lter from the lint compartment, clean

lint in the lint compartment.

• Clean any lint accumulation in and around the motor(s) casing opening.

• NOTE: To prevent damage, avoid cleaning and/or touching ignitor/ame-probe assembly.

Outlet Thermistor (NTC - 1)

Loading ...

Crossover GAS DRYER STAND ALONE Commercial Laundry 7 cu. ft. Grey Gas Dryer, Coin-Operated and Free Use