Crossover GAS DRYER STAND ALONE Installation Manual

Loading ...

Installation

2:1

Installation Procedures

Installation should only be performed by qualied individuals in accordance with local, state, and

national codes. In the absence of these codes, the installation must conform to applicable American

National Standards: ANSI Z223.1- LATEST EDITION (National Fuel Gas Code) or ANSI/NFPA

NO. 70-LATEST EDITION (National Electrical Code) or in Canada, the installation must conform to

applicable Canadian Standards: CAN/CGA-B149.1-M91 (Natural Gas) or CAN/ CGA-B149.2-M91

(L.P. Gas) or LATEST EDITION (for General Installation and Gas Plumbing) or Canadian Electrical

Codes Parts 1 & 2 CSA C22.1-1990 or LATEST EDITION (for Electrical Connections).

Location Requirements

Before installing the dryer, be sure the location conforms to local, state, and national codes. In the

absence of such codes or ordinances the location must conform with the National Fuel Gas Code

ANSI.Z223.1 LATEST EDITION, or in Canada, the installation must conform to applicable Canadian

Standards: CAN/CGA-B149.1-M91 (Natural Gas) or CAN/ CGA-B149.2-M91 (L.P. Gas) or LATEST

EDITION (for General Installation and Gas Plumbing).

Unpacking / Setting Up

IMPORTANT

• Dryer must always be transported and handled in an upright position.

• Remove protective shipping material (i.e., plastic wrap and optional shipping box) from the dryer.

• All four leveling legs on stand-alone models are to be adjusted to level the dryer front to back,

and side to side.

• The machine should be positioned so that there is clearance for users and service personnel.

Loading ...

Crossover GAS DRYER STAND ALONE Commercial Laundry 7 cu. ft. Grey Gas Dryer, Coin-Operated and Free Use