Crossover GAS DRYER STAND ALONE Installation Manual

Loading ...

Installation

WARNING

• Never test for leaks with a ame!!!

WARNING

• This appliance must only be operated with the gas type indicated on the dryer’s data

plate. If the appliance is converted (gas type changed), a data plate amendment must

be obtained from the manufacturer (dryer’s serial number is required to purchase a

conversion kit).

IMPORTANT

• Any burner changes or conversions must be made by qualied personnel.

CONVERSION FROM NATURAL GAS TO PROPANE GAS

WARNING

This procedure must be carried out by a qualied, licensed gas-appliance technician.

• Disconnect electrical power to the dryer.

• Close all shut-off valves in the dryer’s gas supply line.

• Open the toe panel of the dryer.

• Disconnect ignitor wires from harness and

then remove the burner tube.

• Remove the burner orice from the valve

and replace it with the proper orice. Use

orice # 44 for NG and orice # 55 for LP.

Orice number is stamped on the edge of

the hex head of the orice. Securely tighten.

• Put the burner tube on the burner assembly.

Securely tighten.

• Reconnect the ignitor to the harness.

• Observe the cover dial settings indicated

as NG and LP along with the gas type

indicator.

• Position a pair of needle nose pliers into the

slots of the cover dial.

• Rotate the cover dial to line up with LP

marking with the indicator on the gas valve.

WARNING

• Improper FUEL Conversions can result in re or explosion!

2:10

Loading ...

Crossover GAS DRYER STAND ALONE Commercial Laundry 7 cu. ft. Grey Gas Dryer, Coin-Operated and Free Use