Loading ...
Loading ...
Loading ...
Installation
2:6
Electrical Requirements
All electrical connections must be made by a properly licensed qualied electrician. This is to
ensure that the electrical installation is adequate and conforms to local, state, and national codes
in the country of installation. In the absence of such codes, all electrical connections, materials,
and workmanship must conform to the applicable requirements of the National Electrical Code
ANSI/NFPA NO.70-LATEST EDITION or in Canada, the Canadian Electrical Codes Parts 1 & 2
CSA C22.1-1990 or LATEST EDITION.
WARNING
• Failure to comply with these codes or ordinances, and/or the requirements stipulated in this
manual can result in personal injury or component failure.
• Component failure due to improper voltage application will void the warranty.
• Component failure due to improper installation will void the warranty.
IMPORTANT
• A separate branch circuit must be provided for each dryer.
• The dryer must be connected to the electric supply shown on the data label any damage
done to dryer components due to improper voltage connections will void the warranty.
Electrical Service Specications
Gas Heated Models
Electric Heated Models
All electrically heated dryers must be connected to the electric service shown on the dryer’s data
label. The connecting wires must be properly sized to handle the rated current.
Grounding
A ground (earth) connection must be provided and installed in accordance with local, state,
and national codes. In the absence of these codes, grounding must conform to applicable
requirements of the National Electrical Code ANSI/NFPA NO. 70-LATEST EDITION, or in
Canada, the installation must conform to applicable Canada Standards: Canadian Electrical
Codes Parts 1 & 2 CSA C22.1-1990 or LATEST EDITION.
ELECTRICAL SERVICE SPECIFICATIONS (PER POCKET)
SERVICE
VOLTAGE
PHASE
WIRE
SERVICE
APPROX. AMP
DRAW
CIRCUIT
BREAKER
60 Hz
120 1ø 2 6.8 A 15 A
ELECTRICAL SERVICE SPECIFICATIONS (PER POCKET)
SERVICE
VOLTAGE
PHASE
WIRE
SERVICE
APPROX. AMP
DRAW
CIRCUIT
BREAKER
60 Hz
120/240V 1ø 3 24 A 30 A
120/208V 3ø 3 23 A 30 A
Loading ...
Loading ...
Loading ...