Loading ...
Loading ...
Loading ...
Daily Weekly Monthly Yearly
Function inspection
General inspection Vibration damping system* Fuel system
Fuel leaks Muffler* Air filter
Water delivery system Drive belt Clutch
Throttle lockout* Carburetor
Stop switch* Starter housing
Blade guard and SmartGuard*
Cutting blade**
Replace Fuel filter
* Refer to
Safety devices on the product on page 8
.
** Refer to
Cutting blades on page 11
.
To clean externally
• Flush the product externally with clean water after
each day of operation. If it is necessary, use a brush.
To clean the cold air intake
Note: A dirty or blocked air intake makes the product
too hot. This can cause damage to the piston and
cylinder.
• Clean the cold air intake if it is necessary.
• Remove blockage, dirt and dust with a brush.
To examine the spark plug
Note:
Always use the recommended spark plug type.
Use of the incorrect spark plug can cause damage to the
piston and cylinder. For recommended spark plug refer
to
Technical data on page 39
.
Examine the spark plug if the product is low on power,
does not start easily or if it operates unsatisfactorily at
idle speed.
1. Loosen the 3 screws on the air filter cover and
remove the air filter cover.
28 1631 - 001 - 04.05.2021
Loading ...
Loading ...
Loading ...