Loading ...
Loading ...
Loading ...
Installation Instructions
WALL PLENUM AND ARCHITECTURAL LOUVER INSTALLATION
• Install the appropriate wall plenum through the exterior wall in accordance with the Installation Instructions provided
with the plenum,
IMPORTANT: The wall plenum is not designed to carry structural loads.
Proper wall header construction is required. The plenum requires proper flashing,
shim and caulk for a weather resistant installation.
Architectural
Louver--RAVAL1
Proper header for
structural support.
Apply proper caulking
and flashing.
Exterior/Outside Wall
Wall Plenum
RAVWP6 - 6"D x 19_"W x 32"H
RAVWP8 - 8"D x !9_"W x 32"H
RAVWP!2 - !2"D x !9_"W x 32"H
RAVWP!B - !B"D x !9sA"W x 32"H
Properly square
and level plenum.
[_ BUILD AND INSTALL THE ZONELINE
BASE PLATFORM
.
Construct u 23¼" min.x 23¼" min. square platform with legsto
raisethe platform a minimum of 8",
NOTE:The platform must have a loud-bearing capacity of
175 Ibs.minimum.
Left side of platform Back of platform
23¼" '5¼" min.
for
f
drain
access
NOTE:Specific cutout size
for drain connections needs
to be determined by the installer
for the given installation situation.
Cutout for drain
connection(s)
(see NOTEbelow)
18
2. Make drain hole cutout(s):
. Primary Drain - Centerline of drain is
approximately 5¼" from left platform edge
and 8½" from back platform edge.
. Secondary Drain - Centerline of drain
isapproximately 6½" from left platform edge
and S¼" from back platform edge,
3. Placethe platform in the utility closet
with the following clearance between it
and the interior surface of the walls/door/panel:
. 4" rain. from front of the case-
Unit to be installed through FRONTof case
. 5" rain. from front of the case-
Unit to be installed through SIDEof case
. 3" rain. from two sides of the case (5"for side
installation).
4. Align the platform with the opening of
the wall plenum and secure to the floor
using appropriate brackets and bolts.
Loading ...
Loading ...
Loading ...