Loading ...
Loading ...
Loading ...
Getting Ready
To connect the watch with a phone, first install
the CASIO “G-SHOCK Connected” app on the
phone and then use Bluetooth to pair the
watch with the phone.
●
A
Install the app on your phone.
In Google Play or the App Store, search for the
CASIO “G-SHOCK Connected” app and
install it on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
●
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Move the phone to be paired with close to
(within one meter of) the watch.
3.
Y
Tap the “G-SHOCK Connected” icon.
4.
X
Hold down (D) for about two seconds.
Release the button when
e
starts to flash.
5.
Y
Perform the operation shown on the
screen of the phone to be paired with.
When a connection is established
between the watch and phone,
e
will stop
flashing.
●
If pairing fails for some reason, perform
the procedure again from step 1.
Pairing complete.Pairing started.
Note
●
The first time you start up G-SHOCK
Connected, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Auto Time Adjustment
You can configure watch settings to connect
with a phone at preset times each day and
adjust its time settings in accordance with
information obtained from an online time
server.
● Using Auto Adjust
Your watch adjusts its time setting four times
a day according to a preset schedule. It
performs the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
●
The watch may not be able to perform
auto time adjustment under the
conditions described below.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
ー
While G-SHOCK Connected is not
running on the phone
Note
●
If the watch does not indicate the
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
l
Adjusting Hand Alignment
●
If there is a World Time City specified
with G-SHOCK Connected, its time will
also be adjusted automatically.
●
The watch will connect with the phone
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
● Triggering Immediate Time Adjustment
The watch will synchronize its time setting to
that of the phone immediately when they are
connected with each other. Whenever you
want to adjust the watch’s time setting based
on your phone's time, perform the procedure
below to connect with a phone.
1.
X
Press (D).
This causes
e
and [ADJ] to flash on the
display.
e
will stop flashing when a
connection is established between the
watch and phone, and the watch’s time
setting will be synchronized with that of
the phone.
Trying to connect Following time
correction
Note
●
The connection is terminated
automatically after time adjustment is
complete.
●
If time adjustment fails for some
reason, the watch will return to the
Timekeeping Mode without changing
its time setting.
Operation Guide 5554/5555
4
Loading ...
Loading ...
Loading ...