Loading ...
Loading ...
Loading ...
2. Hold down (A) for about two seconds to
cycle through record numbers.
●
Each time you hold down (A), the next
older record number appears.
A
A
A
A
2 seconds
2 seconds
2 seconds
2 seconds
3. Use (D) and (B) to display the
measurement value you want.
D
B
●
Press (A) to toggle the measurement
value display between lap time and split
time.
A
SplitLap
Note
●
A record of the measured data is
created and assigned a number for
each measurement operation (from
start to stop).
Deleting a Particular Record
Use the procedure below to delete a selected
data record.
1. Enter the Recall Mode.
l
Navigating Between Modes
2. Hold down (A) for about two seconds.
Record number
●
Holding down (A) switches the record
number.
3. Hold down (B) and (D) for about two
seconds.
Release the button as soon as [CLR]
appears. This deletes the displayed data.
Note
●
You cannot delete data while an
elapsed time measurement operation
is in progress.
Deleting All Records
You can use the procedure below to clear all
data records in watch memory.
1. Enter the Recall Mode.
l
Navigating Between Modes
2. Hold down (B) and (D) for about five
seconds.
[CLR] flashes and then stops flashing to
indicate that the displayed data record
was deleted. Keep the buttons depressed
until [ALL CLR] flashes for about 1.5
seconds and then stops flashing, which
indicates all data was deleted.
Note
●
You cannot delete data while an
elapsed time measurement operation
is in progress.
Timer
The timer counts down from a start time
specified by you. The watch beeps every
second for the last five seconds of the
countdown.
●
The beeper is muted in the cases described
below.
ー
When battery power is low.
Getting Ready
Enter the Timer Mode.
l
Navigating Between Modes
Operation Guide 5554/5555
14
Loading ...
Loading ...
Loading ...