Loading ...
Loading ...
Loading ...
a.Loosen,thelocknutusinga314-inchwrench.
b. Placea levelontheabrasivebelttableandusing
a3/4-inchwrench,screwthestopboltinoroutuntit
thebelttableislevel,
c. Tightenthelocknut.
BELT
TABLESTOP
-- WRENCH
SURFACE SANDING ON THE SANDING BELT
Hold the workpiece firmly with both hands, keeping
fingers away from the sanding belt.
Keep the end butted against the backstop and move
the work evenly across the sanding belt. Use extra
caution when sanding very thin pieces.
For sanding long pieces, remove the backstop.
Apply only enough pressure to allow the sanding belt
to remove material.
BACKSTOP
\
WORKPIECE
SANDINGBELT
END SANDING ON THE SANDING BELT
It is more convenient to sand the ends of long work-
pieces with sanding belt in a vertica_ position.
See "Basic Operation - Positioning Belt Table" for ad-
justing the belt table, and see "Assembly - Installing
Table Assembly" for adjusting worktable.
Move the work evenly across the sanding belt. For
accuracy, use a miter gauge (accessory),
WORKTABLE
ASSEMBLY
SANDING
BELT
BELT
j TABLE
WORKPIECE
18
Loading ...
Loading ...
Loading ...