Loading ...
Loading ...
Loading ...
getting to know your beat and disc sander
WARNING: To avoid injury from accidental start,
_urn switch "OFF" and remove plug from power
Jource outlet before making any adjustments.
SANDING
DISC
SANDING
PLATE
1
BACKSTOP
LOCK
BOLT
I
BACKSTOP
i SANDtNG
BELT 2
BELT
TABLE
LOCKING
BOLTS
BELT
TABLE
3
TRACKFNG
KNOB
4
TENSION
KNOB
/
WORKTABLE
ASSEMBLY
TABLE
SUPPORT
ROD
PULLEY
COVER
BELT
TABLE
STOP
9 MOUNTING 8
HOLES AUXILIARY
ON-OFF MOUNTING
SWITCH HOLE
(WORKTABLE)
BASE I
7 6
TABLE 1ABIL
POSITIONING ASSEM_I Y
BOLT ; OCK
KNOTd
5
TABLE
LOCK
KNOB
TRUNNION
1. Backstop, ,, Supports the workpieceon the sanding
belt.
2. Belt Table Locking Bolts... Loosening bolts allows
belt table to be raised to the vertical position.
3. Tracking Knob.,. Turning knob clockwise causes
sanding belt to move towards the disc; turning knob
counterclockwise causes sanding belt to move away
from the disc,
4. Tension Knob,,, Sliding knob to the right releases
the sanding belt tension; sliding knob to the left
applies belt tension.
5. Table Lock Knob . . . Loosening knob allows the
worktable to be tilted for bevel sanding (Scale on
tabfe trunnion).
6. Table Assembly Lock Knob • . . Locks the table
assembly onto the table support rod.
7. Table Positioning Bolt . . . Locks the rod into the
base.
8, Auxiliary Mounting Hole . . Allows table assembly
to be mounted for end sanding on the belt side.
15
Loading ...
Loading ...
Loading ...