Loading ...
Loading ...
Loading ...
Appendix
29
I hear unwanted noise.
When the volume for a part is raised, the digital signal
processing may overload the signal, which could cause
distortion or other noises. This is not a malfunction.
Try lowering the volume on each part buon.
You may hear distorted or noisy sounds due to input
overload with certain eects. This is not a malfunction.
In certain electrical environments, you may hear noise due
to a ground loop or other factors.
The pedal switch or expression pedal connected to the
FOOT CONTROLLER jack doesn’t work like it should.
The functions or polarity for the pedal might not be set
correctly.
See “Pedal Function” (page 22) and “Pedal Polarity”
(page 22) for these seings in the SETTING functions.
Is the variable range of the expression pedal set correctly?
Calibrate as shown on “Calibrating an expression pedal”
(page 28).
I cannot record a user song.
The maximum number of user songs is 999.
You may need to delete one (see page 20 “Deleting a user
song”.)
MIDI signals sent to/from this instrument and a
computer are not being correctly received.
Is the USB cable connected correctly to the USB TO HOST
port?
The instrument does not let me access the MEDIA
functions.
Is your USB ash drive correctly plugged in?
If the USB ash drive is correctly plugged in, you should see
in the display.
Loading ...
Loading ...
Loading ...