Loading ...
Loading ...
Loading ...
Playback ona TV Without Audio and Video Inputs
To connect your camcorder to a TV without audio and video inputjacks. You will
need an optional RF output adapter (such as CRF95) and an optional coaxial RF cable
(such as VH82 or VH85) shown on page 48.
Antenna
OR I
Antenna \\
Optional 300/75 ohm
Transformer
Back of TV (such as 193983)
÷-] ........ ,
Optional 75-300 Ohm
Transformer
IN
FROM
A
Optional Coaxial RF Cable
(such as VH82 or VH85)
\ ®
,!
\
F
\ Channel Selector
(_) Disconnect the VHF antenna from
your TV. If you are going to leave
the RF adapter connected to the TV,
connect the antenna to the RF output
adapter.
A.If antenna is round 75-ohm cable,
connect it to 1NFROMANT
connector on RF output adapter.
B.If antenna is flat twin-lead,
connect flat-lead connectors to
screw terminals on optional 300-
75 ohm transformer. Then connect
transformer to IN FROM ANT
connector on RF output adapter.
RF
!
OUT
TO TV
(_) Attach one end of coaxial RF cable
to OUT TO TV connector on RF
adapter, and attach other end of the
cable to VHF input on TV as shown.
Note: If TV has screw terminals, you
may aeed anoptional75-to-300ohm
transformer, suchas AH011.
(_ Attach RF output adapter's yellow
plug to the VIDEO jack, small plug
to the RF DC OUT jack, and white
plug to the AUDIO jack on the side
of the camcorder.
40
Loading ...
Loading ...
Loading ...