Loading ...
Loading ...
Loading ...
26
PROCEDURE
The setting parameters according to the list on page 21 are shown on the display as follows:
the current parameter is shown on the top row of the display, e.g. P 2014,
the set value of the parameter is shown on the bottom row.
1 Go to programming mode. See page 20.
2 Step through to the relevant parameter by pressing the ARROW UP or DOWN buttons repeatedly. If
you go too far, just continue until the display shows the correct parameter.
3 When the display shows the correct parameter, e.g. “P 2012”, press OK to confi rm.
The row will then fl ash with the set value of the parameter.
4 Increase or decrease the value by pressing the ARROW UP or DOWN buttons.
5 To save the set value, press OK.
6 To return to operating mode, press DOWN ARROW and then STOP.
RESTORING TO FACTORY SETTING
1 Go to programming mode as described on page 20.
2 Hold down the ARROW UP and ARROW DOWN keys simultaneously and press OK.
The factory settings will be saved and the display will show the last run programme.
784509au_en.indd 26784509au_en.indd 26 21. 02. 2022 08:26:3121. 02. 2022 08:26:31
Loading ...
Loading ...
Loading ...